Golden Brown Alran Strap With Foldover Clasp For Omega Swatch
Discover your style with our bespoke watch straps handcrafted from the finest selection of quality leather pieces. Waterproof and sweatproof, our straps redefine luxury and comfort all at once!
Leather : Alran
Colour : Golden Brown
Stitching colour : Green
Lining : Cream Zermat
Model : Swatch
Brand : Omega
Please select the Bespoke product category to place your customized order today.
Specifications
Strap Style: Classic
Strap Thickness: 4.5-2.2mm
Buckle Type: Regular
Buckle Finish & Colour: Brushed Silver
What is included
1 x Leather Strap (Long End)
1 x Leather Strap (Short End)
1 x Regular Brushed Silver Buckle – attached to strap, buckle width varies depending on lug width of strap
2 x Quick Release Spring Bars - inserted into lug end of each strap
1 x Strap Packaging Insert (2 Slots)
Size
If you're looking to purchase a strap for your watch, you will need to know the lug width of your watch. Lug width refers to "A" in this schematic below.
There are two ways to find out the lug width of your watch.
- Firstly, you can Google "<watch brand and model> lug width" and see if there is an answer from the brand's website, or some other websites.
- Alternatively, you can simply take a ruler and measure the lug width directly on your watch.
Lug widths are typically in whole numbers, and while the most common lug widths are between 18-22mm, they can go down to 8mm or up to 32mm even. Our ready stock straps are available in 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 24mm and 26mm. If you need other lug widths, you can have it
You will then need to purchase a strap of the same lug width. For example, if your watch has a lug width of 20mm, you will need to purchase strap with a width of 20-16.
Note: Our Widths typically have two numbers, for example 20-16. The first number (20) refers to the lug width ("A" in the schematic above). The second number (16) refers to the buckle width ("B" in the schematic above). You just need to ensure that the first number matches the lug width of your watch.
Strap Length Guide
Basic Sizing Guide
There are two sides per strap, which we refer to as the long end and the short end, which are represented by C and D respectively in the diagram below.
Our handcrafted leather straps come in 3 different lengths.
- Small (C: 105mm, D: 65mm)
- Medium (C: 115mm, D: 70mm)
- Large (C: 125mm, D: 75mm)
A quick way to decide on the length to get is based on your wrist size. Here is the general recommendation (if you are between sizes, we recommend to size up):
- Wrist size of 14.5cm - 17.0cm: Small
- Wrist size of 16.5cm - 19.0cm : Medium
- Wrist size of 18.5cm - 21.0cm: Large
If you need a strap that is shorter than Small (105/65), or longer than Large (125/75), you can always have the strap custom made.
Measurements | Description | S | M | L |
---|---|---|---|---|
A | Lug width | Varies by lug width (see product listing) |
||
B | Buckle width | |||
C | Long strap length | 105mm | 115mm | 125mm |
D | Short strap length | 65mm | 70mm | 75mm |
E | Distance to middle hole | 63mm | 71mm | 81mm |
F | Distance between holes | 6mm | ||
G | Size of holes | 1.8mm | ||
Number of Strap Holes | 7 | 7 | 7 |
Advanced Sizing Guide
We are now running a trial on split size ordering. This is only recommended if you are more experienced with how leather straps wear on your wrist, and you know the specific length of straps that you require on both the long and short end.
For example, you might currently have a Medium size strap on your watch (115mm and 70mm), and you notice that the buckle sits in the middle of the wrist, but the long end of the strap is too long and can be seen when the watch is on your wrist. In such a situation, you may need a long end that's shorter than 115mm, but the buckle end of the strap should remain unchanged at 70mm. In this case, you might want to order 105mm/70mm instead of the standard 115mm/70mm.
If you are unsure what length you require for each side of the strap, we recommend sticking with the three standard sizes, Small, Medium and Large.
Hope this quick guide helps! Finding the perfect length to get can be a little bit more complicated, as it also depends on the lug-to-lug distance of your watch, and even the shape of your wrist. For a more detailed guide on sizing, please check out this page.
BARENIA LEATHER FROM TANNERIES HAAS
Barenia leather is renowned for its supple feel, making it exceptionally comfortable and luxurious to the touch. The smooth surface, with its fine pores, gives it a slight shine leave the space for the watch to be main character . Over time, the leather not only becomes softer but also develops a beautiful patina, with a slight darkening that adds your own unique strap.
HYPOALLERGENIC ZERMATT LEATHER FOR LINING
Our watch straps feature Zermatt leather sourced from the Haas tannery, carefully chosen and developed to serve as premium lining material. Renowned for its softness and enduring comfort, even through extended wear, this leather is crafted to resist water and sweat, making it ideal for climates like Viet Nam 's hot and humid conditions.
Seal with Multiple painted layer
Our process involves meticulously finishing the edges with multiple layers of edge paint to achieve a smooth and uniform appearance. Each edge undergoes sanding before the application of edge paint. Following the drying of the initial layer, we repeat the sanding and painting procedure iteratively until the edge paint achieves a polished and consistent finish
Saddle Stitched By Hand With Linen Thread
Each strap undergoes meticulous saddle stitching by the skilled hands of Zenio artisans. Unlike machine-produced lock stitches, our method ensures unparalleled durability, with two independent stitches forming a secure knot at every point. We exclusively use 0.35mm linen thread, chosen for its delicate yet robust weave, enhancing the natural beauty of our craftsmanship.
Your cart is currently empty.
Start Shopping